MAINTENANCE 

USB Backup & Restore

Introduction

It is recommended you make a backup of your gauge settings. The USB tab in the CONNECTION or HARDWARE screen allows the gauge settings to be backed up to a USB stick. The backup can then be used to restore the original settings in the event they are altered inadvertently or become corrupted during a software update.

Applicable Model(s):

Procedure

1. Access the gauge menu.
2. Enter the access code ‘22085’.
SupervisorLogin

3. Select ‘Settings’ from the displayed menu.
4. Select ‘Connection’ or ‘Hardware’ from the menu (depending upon the gauge).
BackupRestore-2

5. Select the ‘USB’ tab.
6. Select an option using the touch screen.

Update Driver From Internal Memory

Updates the firmware in the interface IC. The new firmware must be placed in the internal gauge memory first. Contact Versatile Technology for further instructions if this is necessary.

Backup Gauge Firmware To USB

Makes a copy of the gauge software on a USB stick. The firmware copy can be copied back into the gauge in the case of system failure or unnecessarily firmware version update.

1. Plug the USB stick into the SERVICE PORT of the gauge.
2. Touch the ‘Backup Firmware To USB’ button.
BackupRestore-3

3. Wait for the process to complete.

Backup Gauge Settings To USB

Copies all gauge files required for operation to USB stick.

1. Plug the USB stick into the SERVICE PORT of the gauge.
2. Touch the ‘Backup Gauge Settings To USB’ button.
BackupRestore-4

3. Wait for the process to complete.

Backup Gauge Settings To USB

Restores all gauge files previously saved to the USB stick using the “Backup Gauge Settings To USB” functionality.

1. Plug the USB stick into the SERVICE PORT of the gauge.
2. Touch the ‘Backup Gauge Settings To USB’ button.
BackupRestore-5

3. Wait for the process to complete.